Характеристики и описание
Supply | |
|---|---|
| Supply voltage | 24 VDC ± 10 % |
| Current consumption no load | <= 100 mA |
| Measuring principle | magnetostrictive |
| Measuring length, standard | 50…4000 mm, in steps |
| Resolution | 0.001 mm |
| Linearity deviation | ± 0.10 mm <= 1500 mm |
| ± 0.15 mm > 1500 mm | |
| Reproducibility | 0.005 mm |
| Hysteresis | 0.02 mm <= 1500 mm |
| 0.1 mm > 1500 mm | |
| Characteristics - Validity | using original TR Magnets |
| Temperature coefficient | < 40 ppm/°C FS |
| FS: | Full-Scale |
| Straight line velocity | no restrictions |
| Mounting position | no restrictions |
| Material - Measuring body | Cr/Ni - alloy |
| Rod end mounting | Option |
| Magnet | T4-M33 |
| other on request | |
Analog - Interface | |
| Voltage/Current | Factory setting |
| Resolution | 16 Bit D/A converter |
| Voltage output | 0…+10 VDC |
| Voltage output | -10…+10 VDC |
| Load resistance (U) | >= 0.68 kOhm |
| Current output | 0…20 mA |
| Current output | 4…20 mA |
| Load resistance (I) | <= 500 Ohm |
| Cycle time internal, <= 1.00 m | 0.50 ms |
| Cycle time internal, <= 1.50 m | 0.75 ms |
| Cycle time internal, <= 2.00 m | 1.00 ms |
| Cycle time internal, <= 3.00 m | 2.00 ms |
| Cycle time internal, > 3.00 m | 4.00 ms |
External inputs | |
| Set-Input 1 | Analog initial point |
| Set-Input 2 | Analog end point |
| Logic level | "0“ < +2V, "1“ = Supply |
Supply
По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |
Или отправьте нам запрос на e-mail: zapros@filfar.by
Доставка
Оплата и гарантии